Presentation Videos

Adaptive Welding for Shipbuilding and Offshore Structures

Adaptive Welding for Shipbuilding and Offshore Structures

Presented by Robert Pistor during Welding Industry Day- February 7th, 2024

Development of In-Situ Weld Cooling Rate Measurement Methods

Development of In-Situ Weld Cooling Rate Measurement Methods

Presented by Tom McGaughy during Welding Industry Day- February 7th, 2024.

Innovation in our Products through Investment in our People

Innovation in our Products through Investment in our People

Presented by Shallyn Nowakowski & Shayne Sutcliffe during Welding Industry Day- February 7th, 2024.

Welding Engineering Problem Solving Resources

Welding Engineering Problem Solving Resources

Presented by Mitch Matheny during Welding Industry Day- February 7th, 2024.

Welding Foundation at UAPICBC – Doing Things Different

Welding Foundation at UAPICBC – Doing Things Different

Presented by Will Schwarz during Welding Industry Day- February 7th, 2024.

Creating a New Way to Learn

Creating a New Way to Learn

Presented by Dusty James during Welding Industry Day- February 15th, 2023.

Shear Strength of Fillet Welds

Shear Strength of Fillet Welds

Presented by Girish P. Kelkar during Welding Industry Day- February 15th, 2023.

Why Welds Fail

Why Welds Fail

Presented by Aaron Dinovitzer during Welding Industry Day- February 15th, 2023.

Advancing the Workforce Through Indigenous PSE Education and Training in Trades

Advancing the Workforce Through Indigenous PSE Education and Training in Trades

Presented by Richard Green, Jake Jamieson, Rebecca Smoke, Jade Peltier & Dave Barnes during the Educators Conference, May 3-4 2022.

Advantage of Industry Partnerships in Education

Advantage of Industry Partnerships in Education

Presented by Kristina O'Grady & Yasser Elmasri during the Educators Conference, May 3-4 2022.

ApprenticeSearch.com: Gateway To The Trades

ApprenticeSearch.com: Gateway To The Trades

Presented by Kathryn Gibbons during the Educators Conference, May 3-4 2022.

Brain Hacks to Optimize the ADHD Brain for Learning

Brain Hacks to Optimize the ADHD Brain for Learning

Presented by Lara Dawn during the Educators Conference, May 3-4 2022.

Forging Forward – CWB Welding Foundation Update

Forging Forward – CWB Welding Foundation Update

Presented by Susan Crowley during the Educators Conference, May 3-4 2022.

Introduction and Scope of the New CGSB Visual Testing Certification

Introduction and Scope of the New CGSB Visual Testing Certification

Presented by Josh Brewster during the Educators Conference, May 3-4 2022.

Introduction to Handheld Laser Welding

Introduction to Handheld Laser Welding

Presented by Joseph Roy during the Educators Conference, May 3-4 2022.

Level 3 Apprenticeship - A Hybrid Approach to Teaching

Level 3 Apprenticeship - A Hybrid Approach to Teaching

Presented by Adam Clifford during the Educators Conference, May 3-4 2022.

New High School Welding Resources - Supporting our Future

New High School Welding Resources - Supporting our Future

Presented by Dayton Block & Mike Park during the Educators Conference, May 3-4 2022.

Practical Guidelines for Welding PPE in Schools

Practical Guidelines for Welding PPE in Schools

Presented by Jim Galloway during the Educators Conference, May 3-4 2022.

Welding Fume Management

Welding Fume Management

Presented by Viwek Vaidya during the Educators Conference, May 3-4 2022.

What Makes Welding Work?

What Makes Welding Work?

Presented by Patricio Mendez during the Educators Conference, May 3-4 2022.

How Smart Projects Review Welding Procedure Specifications

How Smart Projects Review Welding Procedure Specifications

Presented by Roy Christensen during Welding Industry Day- Feb 9th, 2022.

Hydrostatic Testing Course Overview

Hydrostatic Testing Course Overview

Presented by Shaun Paranych during Welding Industry Day- Feb 9th, 2022.

Laser Cladding and Laser Heat-Treating Basics and the Latest Innovations

Laser Cladding and Laser Heat-Treating Basics and the Latest Innovations

Presented by Steve Borle during Welding Industry Day- Feb 9th, 2022.

Residual Stress Management in Welding

Residual Stress Management in Welding

Presented by Jacob Kleiman during Welding Industry Day- Feb 9th, 2022.

Advancements In Aluminum Joining Solutions

Advancements In Aluminum Joining Solutions

Presented by Tim Hurley/Kyle Smith during the CanWeld Conference, October 14th 2021.

AI-Driven Simulation of Overlay Welding

AI-Driven Simulation of Overlay Welding

Presented by Mahyar Asadi during the CanWeld Conference, October 13th 2021.

Automation in Shipbuilding – Riveting to Cobots

Automation in Shipbuilding – Riveting to Cobots

Presented by David Millar during the CanWeld Conference, October 13th 2021.

CSA Standard W186 (2021) Highlights

CSA Standard W186 (2021) Highlights

Presented by Cristian Zanfir during the CanWeld Conference, October 13th 2021.

CWB Association- Industry Awards 2021

CWB Association- Industry Awards 2021


These awards were presented during CanWeld Conference, Oct 13-14, 2021.

CWB Welding Foundation Programs

CWB Welding Foundation Programs

Presented by Susan Crowley during the CanWeld Conference, October 13th 2021.

Educating Welding & Robotics Technologists and Technicians

Educating Welding & Robotics Technologists and Technicians

Presented by Jim Galloway during the CanWeld Conference, October 14th 2021.

Feasibility Study of Cold Wire Gas Metal Arc Welding (CW-GMAW) of AA5052 H-32 Aluminum Butt Joints

Feasibility Study of Cold Wire Gas Metal Arc Welding (CW-GMAW) of AA5052 H-32 Aluminum Butt Joints

Presented by Adrian Gerlich during the CanWeld Conference, October 14th 2021.

High Performance Field Overlay through Welding Automation

High Performance Field Overlay through Welding Automation

Presented by Dongmei Sun during the CanWeld Conference, October 13th 2021.

How to Move From Manual Vision Arc Weld Inspection to Robot Vision

How to Move From Manual Vision Arc Weld Inspection to Robot Vision

Presented by Jeffrey Noruk during the CanWeld Conference, October 13th 2021.

Optimizing Arc Cone to Puddle Ratio With HyperFill Twin Wire Pulse GMAW Transfer

Optimizing Arc Cone to Puddle Ratio With HyperFill Twin Wire Pulse GMAW Transfer

Presented by Ken Mui during the CanWeld Conference, October 14th 2021.

Why is Certification Essential? Why Should it be Considered Mandatory?

Why is Certification Essential? Why Should it be Considered Mandatory?

Presented by Hellen Christodoulou during the CanWeld Conference, October 13th 2021.

Choose Your Own Adventure

Choose Your Own Adventure

Presented by j’Amey Bevan during the Educators Conference, June 1st 2021

Welding Through an Indigenous Lens

Welding Through an Indigenous Lens

Presented by Mike Johnston during the Educators Conference, June 1st 2021

A Practical Approach to Post Pandemic Training

A Practical Approach to Post Pandemic Training

Presented by Josh Brewster during the Educators Conference, June 1st 2021

Live Weld Build

Live Weld Build

Presented by Daniela Torelli during the Educators Conference, June 2nd 2021

Our Response to Gender Equity in Welding

Our Response to Gender Equity in Welding

Presented by Mackenzi Johnston & Jolene Borrelli during the Educators Conference, June 2nd 2021

Post-Covid Teaching Tools

Post-Covid Teaching Tools

Presented by Max Ceron during the Educators Conference, June 2nd 2021

Social Media and Welding

Social Media and Welding

Presented by Kevin Roy during the Educators Conference, June 1st 2021

Sparking Success Panel

Sparking Success Panel

Presented by CWB Welding Foundation during the Educators Conference, June 1st 2021

Spotlight on Student Projects

Spotlight on Student Projects

Presented by CWB Welding Foundation during the Educators Conference, June 2nd 2021

Transforming CWB Learning Resource

Transforming CWB Learning Resource

Presented by the CWB Education Team during the Educators Conference, June 1st 2021.

Advancements in ADF Technology & Welding PPE

Advancements in ADF Technology & Welding PPE

Presented by Ryan Boyd & Jim Watkins during the Virtual Welding Industry Day, February 2021

Carbon–Why it Does What it Does to Ferrous Metals

Carbon–Why it Does What it Does to Ferrous Metals

Presented by Max Ceron during the Virtual Welding Industry Day, February 2021

CWB Welding Foundation Update

CWB Welding Foundation Update

Presented by Susan Crowley during the Virtual Welding Industry Day, February 2021

StarGold Aluminum – Designed for high quality joining

StarGold Aluminum – Designed for high quality joining

Presented by Ron Dyck during the Virtual Welding Industry Day, February 2021

Technological Breakthrough in Wire Feeder Design

Technological Breakthrough in Wire Feeder Design

Presented by Christian Oliver during the Virtual Welding Industry Day, February 2021

Welding Fume Management and Control

Welding Fume Management and Control

Presented by Susan Fiore during the Virtual Welding Industry Day, February 2021

Welding – Tune it like a Race Car

Welding – Tune it like a Race Car

Presented by Jim Gilbank during the Virtual Welding Industry Day, February 2021.

Calculating ROI for Welding Cobots and Factors to Consider

Calculating ROI for Welding Cobots and Factors to Consider

Presented by Soroush Karimzadeh during the Virtual Welding Industry Day, November 2020

Closed-Loop Feedback Control for Industrial DED

Closed-Loop Feedback Control for Industrial DED

Presented by Gentry Wood during the Virtual Welding Industry Day, November 2020

Comparative Review of Welding Standards Followed Around the World

Comparative Review of Welding Standards Followed Around the World

Presented by Cristian Zanfir during the Virtual Welding Industry Day, November 2020

CWB Welding Foundation- Spark something amazing!

CWB Welding Foundation- Spark something amazing!

Presented by Joe Saundercook during the Virtual Welding Industry Day, November 2020

Educating Welding & Robotics Technologists and Technicians

Educating Welding & Robotics Technologists and Technicians

Presented by Joe Barnes during the Virtual Welding Industry Day, November 2020

Getting to know the CWB Welding Foundation

Getting to know the CWB Welding Foundation

Presented by Susan Crowley during the Virtual Welding Industry Day, November 2020

Optimizing Arc Cone Puddle Ratio With Hyperfill Twin Wire Pulse GMAW Transfer

Optimizing Arc Cone Puddle Ratio With Hyperfill Twin Wire Pulse GMAW Transfer

Presented by Ken Mui during the Virtual Welding Industry Day, November 2020

The Necessity of Health and Safety While Implementing New Technologies

The Necessity of Health and Safety While Implementing New Technologies

Presented by Duncan Beaumont during the Virtual Welding Industry Day, November 2020

What’s Next for Industrial Welding

What’s Next for Industrial Welding

Presented by Peter Warrian during the Virtual Welding Industry Day, November 2020

A Foundation of Support

A Foundation of Support

Presention by Mike Johnston at CanWeld 2018

Shared Social Investment

Shared Social Investment

Presented at Canweld 2018

Enhanced Welder Apprenticeship Training

Enhanced Welder Apprenticeship Training

Presented at Canweld 2018